Color Masterbatch commonly used classification are the following

November 11, 2010 on 9:01 pm | In Tech | No Comments

The full name is called masterbatch color masterbatch, also known as species, is a new polymer-specific coloring agent, which consists of pigments or dyes, carriers and additives, composed of three basic elements, is the extraordinary amount of pigment or dye evenly being attached to the resin contained in the resulting aggregate can be seen as pigment concentrates, his coloring was higher than paint itself. Masterbatch is mainly used in the plastic. To achieve in the plastic or rubber products, to achieve the desired color effect.
Color Masterbatch commonly used classification are the following:
Sort by carriers: such as PE masterbatch, PP Masterbatch, ABS Masterbatch, PVC Color Masterbatch, EVA masterbatch, etc.
By Type: injection Masterbatch, Color Masterbatch blowing, spinning, etc. Color Masterbatch
All varieties can be divided into different grades, such as:
1. Senior injection Masterbatch: for cosmetics packaging, toys, electrical enclosures, and other advanced products.
2. Normal injection Masterbatch: for general household plastic products, industrial containers.
3. Senior blown film Masterbatch: for ultra-thin products, blow molding coloring.
4. General blowing masterbatch: for general packaging bags, woven bags, blow molding coloring.
5. Spinning Masterbatches: for the textile fiber spinning colored pigments fine particles, high concentration, strong coloring, heat, light and good.
6. Low Color Masterbatch: do not ask for the manufacture of color quality, low-level products, such as trash, low-level containers.
7, dedicated Masterbatch: is based on user-specified for the products, plastic variety, use the same plastic as a carrier created by the masterbatch. Such as PP Masterbatch, ABS Masterbatch were selected PP, ABS as a carrier.
8, Universal Masterbatch: also use a resin (usually the low melting point of PE) as a carrier, but it can be applied in addition to its carrier resin other than the resin coloring. Universal masterbatch is relatively simple, but the disadvantage more, the user selection of specific masterbatch. The general level of special heat-resistant masterbatch is suitable for plastic products, in normal temperature, safe to use. Only in the following cases can cause varying degrees of color, first, the temperature outside the normal range, one down too long.
Why Color Masterbatch without toner?
1. In many cases, the plastic products manufacturers in the use of toner used when the paint color is not the most economical, but not familiar with because of the pigments, the color when the trial, resulting in waste of manpower and materials is very common. This problem does not exist using the masterbatch.
2. Using masterbatch coloring products and products with a dye whose coloring is completely different level, its price also higher than some, higher prices are often higher than the increase in the cost of using the masterbatch, the color Instead, the mother can create "profit." From this perspective, in some cases, the use of color masterbatch color toner to be more than the use of "economic."

Hint:If there is any inconsistency or conflict between the English and Chinese versions, the Chinese version shall prevail for all purposes.

No Comments yet »

RSS feed for comments on this post. TrackBack URI

Leave a comment

Entries and comments feeds. Valid XHTML and CSS. ^Top^