PP calcium carbonate filling masterbatch

February 11, 2011 on 11:52 am | In Products | No Comments

Injection level PP calcium carbonate filling masterbatch, good fluidity and white degree is high, the products can be used for machining luster, PP, PE plastic products,

PP caco3

such as: disposable fast-food, knife, fork, pallets, eat mat, cap, bags, tubes, electrical hull, all kinds of plastic components,

Widely used in injection molding, blow bottle, plastic knife and fork, snack box, tubes, sheet, corrugated board, electrical housing, pack, woven bag, ruddish bags, shopping bags, non-woven, striped cloth, flow delay membrane etc.

recommend add ratio 20% ~ 50%, processing temperature ℃ – 240 ℃ 220

The product has obtained SGS environmental protection attestation

25 kg/bag

Chinese New Year

February 11, 2011 on 11:36 am | In New Features | No Comments

New Year New vision, to force 2011, together with your expectations of a win-win harvest rabbit years!

Congratulation!

Color Masterbatch commonly used classification are the following

November 11, 2010 on 9:01 pm | In Tech | No Comments

The full name is called masterbatch color masterbatch, also known as species, is a new polymer-specific coloring agent, which consists of pigments or dyes, carriers and additives, composed of three basic elements, is the extraordinary amount of pigment or dye evenly being attached to the resin contained in the resulting aggregate can be seen as pigment concentrates, his coloring was higher than paint itself. Masterbatch is mainly used in the plastic. To achieve in the plastic or rubber products, to achieve the desired color effect.
Color Masterbatch commonly used classification are the following:
Sort by carriers: such as PE masterbatch, PP Masterbatch, ABS Masterbatch, PVC Color Masterbatch, EVA masterbatch, etc.
By Type: injection Masterbatch, Color Masterbatch blowing, spinning, etc. Color Masterbatch
All varieties can be divided into different grades, such as:
1. Senior injection Masterbatch: for cosmetics packaging, toys, electrical enclosures, and other advanced products.
2. Normal injection Masterbatch: for general household plastic products, industrial containers.
3. Senior blown film Masterbatch: for ultra-thin products, blow molding coloring.
4. General blowing masterbatch: for general packaging bags, woven bags, blow molding coloring.
5. Spinning Masterbatches: for the textile fiber spinning colored pigments fine particles, high concentration, strong coloring, heat, light and good.
6. Low Color Masterbatch: do not ask for the manufacture of color quality, low-level products, such as trash, low-level containers.
7, dedicated Masterbatch: is based on user-specified for the products, plastic variety, use the same plastic as a carrier created by the masterbatch. Such as PP Masterbatch, ABS Masterbatch were selected PP, ABS as a carrier.
8, Universal Masterbatch: also use a resin (usually the low melting point of PE) as a carrier, but it can be applied in addition to its carrier resin other than the resin coloring. Universal masterbatch is relatively simple, but the disadvantage more, the user selection of specific masterbatch. The general level of special heat-resistant masterbatch is suitable for plastic products, in normal temperature, safe to use. Only in the following cases can cause varying degrees of color, first, the temperature outside the normal range, one down too long.
Why Color Masterbatch without toner?
1. In many cases, the plastic products manufacturers in the use of toner used when the paint color is not the most economical, but not familiar with because of the pigments, the color when the trial, resulting in waste of manpower and materials is very common. This problem does not exist using the masterbatch.
2. Using masterbatch coloring products and products with a dye whose coloring is completely different level, its price also higher than some, higher prices are often higher than the increase in the cost of using the masterbatch, the color Instead, the mother can create "profit." From this perspective, in some cases, the use of color masterbatch color toner to be more than the use of "economic."

Caco3 Filler

November 3, 2010 on 12:06 pm | In Products | No Comments

Caco3-Filler 

Features:

1, the products in the PO, PE film products such as filled with good dispersion and compatibility.
2, a significant reduction in the cost of plastic products, plastic raw materials savings, increase economic efficiency.
3, good plastics, grains, good whiteness, for the milky white film, may be appropriate to reduce the amount of a white mother.
4 Guangyan eliminate products, increasing the film and the opening of shading.
5, non-toxic, tasteless.
Second, the adaptation range for injection molding, extrusion, drawing, PO, PE bags, roll bags, shopping bags, vest bags, garbage bags, rolling film.

processing instructions

1. And a direct mixing of raw materials production, without changing the process.
2. Add 10% to 30% the proportion Note: pay attention to moisture moisture, avoid direct sunlight, at 8 hours after opening for use.
The company’s products to ensure quality, reasonable price, customers are welcome to inquire to buy used.

PPR Masterbatch

November 3, 2010 on 11:45 am | In Products | No Comments

PPR masterbatch is one of my company introduced species, which have the following technical characteristics.

PPR
1, non-toxic
2, high temperature (220 ℃ high temperature for 5 minutes or more does not fade)
3, smaller melt index, the higher molecular weight.
4, the higher the intrinsic viscosity.
5, heat stabilizers. UV WP agent. (200 ℃ oxidation induction time> 60min, UV absorption coefficient ≥ 400)
Thus the formation of the following characteristics:
1, high temperature,
2, no bleeding.
3, the PPR for the matrix material for almost does not affect the physics of the original PPR pipe performance.
4, meet the health requirements, the use of masterbatch in the pipe line with GB/T17219-98 standards.
5, little or no adsorption of the adsorption of chloroform.
6, an outstanding price. Prices much lower than similar imported products, while the performance is very close to or equivalent.
Note: (PPR grade masterbatch Features)
① high concentration, full color, metal sense.
② processing performance, long-term process without removal of material, pipe surface without removal of material, pipe surface without smooth, no scratches.
③ regulation size PPR materials, improved processing performance and reduce processing has generated a quality problem.
Variety: light gray camel, camel gray, white, green, yellow, blue, red stone Hz, iron gray and so on.
Proposed to add the ratio: 1:50 Can be customized according to customer requirements.

All chromatography Masterbatch

October 25, 2010 on 6:21 pm | In New Features | No Comments

Our company specializes in providing customers with a variety of services, can provide the color of the preparation of chromatography solutions for the design and color. According to customer samples, templates, Pantone swatch book, RAL color card number, etc. color, color difference of 0.2 or less.

Application process include: injection molding, extrusion, blown film, blow molding, lamination, drawing; use of carriers, including: PE, PP, EVA, PVC, K plastic, ABS, PS, PET, PA6 and so on.

Color Masterbatches for Plastics

October 25, 2010 on 5:53 pm | In Business | No Comments

Plastic masterbatches Hesheng Masterbatches products through the authentication and SGS environmental authentication, food, the FDA passed ISO9001:2000 international quality management system certification.

Our company is engaged in plastic earlier domestic r &d and production shaimuliao enterprises. Dongguan Hesheng Masterbatches Co., Ltd (http://www.chinamasterbatches.com/) is located in Dongguan City, Guangdong Province, famous for, the company focus on product quality and technical innovation.

We have a large number of industry experienced professional and technical personnel, research and innovation of enterprises laid a solid foundation, the company in the field of masterbatch, with deep industry experience, working closely with relevant universities, focus on new product development and research, Technology accounts for the international advanced level.

Pigment vs Color Masterbatch Which Is Better

September 27, 2010 on 2:34 pm | In Tech | No Comments

The essential difference between pigment and color Masterbatch is: color masterbatch is pre-dispersed pigments in products. Color Masterbatch advantage is due in advance to do a good pre-dispersed, so very convenient to use, added directly, no need to do this step the dispersion. But the drawback is that overall costs masterbatch is relatively high.

The pigment has the advantage of relatively low overall costs, but requires the use of pigmentof the technical staff of the dispersion of pigment have good technical knowledge, or duplication of efforts, in addition to dust pollution. Personally, I think: If the factory funded, there are certain technical team can use the pigment completely, the costs can be reduced.

If the relatively small size of the factory, I still recommend buying more convenient color masterbatch, color matching technology are scattered, and let other people do, to be his last as long as the molding on it.

Chemical composition of plastic Color Masterbatch composition

September 27, 2010 on 2:22 pm | In Tech | No Comments

1. Pigments or dyes

  Pigments are divided into organic pigments and inorganic pigments
  Commonly used organic pigments are: phthalocyanine red, phthalocyanine blue, phthalocyanine green, light red, red molecules, macromolecules yellow, Permanent Yellow, Violet, azo red. Inorganic pigments commonly used are: cadmium red, cadmium yellow, titanium dioxide, carbon black, iron oxide red, iron oxide yellow, etc.

2. Carrier

  Is the matrix of masterbatch. Selection and products exclusive resin masterbatch generally the same resin as carrier, the compatibility of the two best, but we must consider the carrier mobility.

3. Dispersant

  Make pigment evenly dispersed and no longer rally, the melting point of dispersing agent should be lower than the resin, the resin has good compatibility, and pigments have good affinity. The most commonly used dispersants are: low molecular weight polyethylene wax, stearic acid salt.

4. Additives

  Such as flame, brightening, anti-bacterial, anti-static, anti-oxidation and other species, unless the customer requests, generally do not contain the additive masterbatch.

The company has professional technical staff, according to the manufacturer’s requirements for different product colors timely and accurate preparation of the customers need a variety of high-quality mixed-dye, and a variety of high-end customers to meet the required colored plastic products, particularly prone to problems of the current PC, PA, PET, PVC, TPR, PP, PE and other plastic products is a unique coloring techniques.

They can also set up specifically for the customers private files, improve customer competitiveness of their products to meet customer demand for high-end color.

Black Masterbatches 2014

September 27, 2010 on 1:27 pm | In Products | No Comments

Black Masterbatches 2014 Cabot selection of imports and import of high concentrations of carbon black melanin new PE material polyethylene resin, and imported paint additives, water-cooled high-energy mixing extruder, air Dice made of carbon black content of 56%.

Appearance

3.0 * 3.2 black flake-shaped vertebral body and 3.0 * 3.3 rounded black body

Adaptation range

Most of the tree for that heat. Injection, pumping tablets, clips and other technology, an environmentally friendly high concentration, injection molding grade high-luminosity black masterbatch, the product of heavy metals through the EU SGS environmental protection test certified eight items.

Advantages

Environmental protection, non-toxic, odorless, smokeless, surface smooth and glossy and the color stability of solid color, will not color point and color patterns such phenomena, not only reduce costs, saving additives, reducing factory space pollution.

Usage

Production and raw materials can be mixed evenly.

Usage

Recommended dosage of 1% -3% (depending on the product requirements).

Technical parameters

Bulk density: 25 “C 1750kg/m3
Melting point: 130-250′C
Solution that: 40g/10min
Water: 0.02%

Package

25KG / bag, polyethylene bag or milky white printing paper and plastic bag (to be made according to customer demand).

Storage

Store in a cool dry place, avoid prolonged sun exposure, rain.

Remarks

The above data are not provided for the use of specific technologies, the basic test shall prevail.

Page 1 of 512345

Entries and comments feeds. Valid XHTML and CSS. ^Top^